Course Modules

Course 1: Introduction to Airport Electrical and Lighting Systems

• Overview of airport lighting and electrical infrastructure

• ICAO Annex 14 and FAA Advisory Circulars overview

• Role of AGL systems in flight operations

• Classification of lighting systems: Runway, Taxiway, Apron

• Exercise: Mapping lighting systems to airport layout

Course 2: Runway and Taxiway Lighting Systems

• Types and configuration of runway edge, threshold, and centerline lights

• Approach and touchdown zone lighting

• Taxiway lighting systems: edge, centerline, clearance bar lights

• Visual aids: stop bars, guard lights

• Case Study: Lighting scheme for CAT I/II/III airports

Course 3: Apron, Obstruction, and Helipad Lighting Systems

• Apron floodlighting and stand guidance systems

• Obstruction lighting and marking

• Helipad lighting standards and applications

• ICAO photometric and chromaticity requirements

• Site Exercise: Light positioning and safety clearance

Course 4: Lighting Power Supply and Constant Current Regulators (CCRs)

• Power supply architecture for airfield systems

• Series circuit principles for AGL systems

• CCR selection, configuration, and calibration

• Load calculations and power factor management

• Group Activity: Design a lighting power distribution system

Course 5: Lighting Control and Monitoring Systems (ALCMS & SCADA)

• Airport Lighting Control and Monitoring Systems (ALCMS) architecture

• Interface with air traffic control and tower systems

• SCADA integration for lighting and power systems

• Remote diagnostics, alerts, and control strategies

• Simulation: Lighting control for runway operations

Course 6: Electrical Cabling, Transformers, and Circuit Design

• Cable selection (insulation, screening, voltage rating)

• Primary vs. secondary circuits

• Transformer types and protection methods

• Grounding and surge protection systems

• Exercise: Fault current and voltage drop calculations

Course 7: Maintenance Planning and Fault Diagnosis

• Routine and preventive maintenance plans

• Inspection techniques and testing protocols

• Common lighting faults and troubleshooting tools

• Record keeping and digital maintenance logs

• Site Visit or Virtual Tour: AGL maintenance inspection

Course 8: Emergency Power and Backup Systems

• Uninterruptible Power Supply (UPS) systems

• Generator sets and automatic transfer systems

• Battery backup and fail-safe designs

• Electrical safety during emergency mode operation

• Case Study: Power failure incident and response analysis

Course 9: Compliance, Safety, and Environmental Considerations

• ICAO/EASA/FAA inspection and certification processes

• Safety regulations: grounding, signage, protective gear

• Light pollution, energy efficiency, and sustainability practices

• Environmental considerations in lighting installations

• Activity: Develop a safety checklist for AGL operations

Course 10: Final Project, Case Studies, and Course Review

• Review of real-life AGL system upgrades and incidents

• Presentation: Design an AGL system for a medium-sized airport

• Group Feedback and Q&A session

• Final Evaluation Quiz

• Certificate Award Ceremony